Product Details
Take control of your installed aftermarket devices by using our ModuleSettings integrated device.
One of the negative aspects of installing aftermarket components in your vehicle is the inability to easily control them from a central device. We have decided to do something about it and build a device that can control most devices you install. You can now easily turn on, turn off, reboot, and set a startup mode (on/off) for any device you decide to install. No more fiddling with the dash cam wire every time it decides to crash or freeze. Simply hit reboot and done. Do you have a device that sometimes you want on and sometimes off when the car starts? Simply set the startup toggle and done. How about controlling Parktronic/ESP/suspension level for ABC vehicles? Check. Integrating the Mercedes atomizer into your ride? Yes, it does that too. Read on for more details.
5 Zones
Control up to 5 “Zones” at a time. Set the connection details and select from a set of predefined names or generic device names. You can have all 5 configured, or just 1.
Control Buttons
Select up to 4 actions for the on/off buttons, each action with specific timing control. Reboot your device based on your defined on/off routine and set a toggle status for the device when the car is turned on.
Parktronic Problems
In addition to controlling universal devices, the system can also set a Parktronic startup mode, if equipped. Interference with the parking system is becoming more common and the alarm it sets off is jarring. You can simply have it be off when you start the car. Enable when needed.
Mercedes Air Balance
Do you like the Mercedes atomizer installed in newer generation vehicles? Our device can control that as well, if you happen to have one handy. We believe all cars should smell good, not just newer ones. It can be installed in the center console or glove box and easily be controlled by our device and app. The atomizer is not included in this package.
Chassis Controls
If you happen to have a vehicle with ABC suspension, our system can raise and lower your vehicle from the onscreen controls. Disabling traction control can also be accomplished from the same location. Last but not least, Parktronic can be enabled/disabled. Sure, most Android headunits offer similar controls, but they are usually built into their launchers. If you decide to use your own launcher it becomes difficult to access these controls. Our system also has separate CAN bus connections so should something go wrong with your headunit, this offers a nice backup.
Temperature Control
If you have a device that really should be cooled but is not, we have a solution for that. Our system can power up to 2 external fans (5V, 0.2A max) that work in conjunction with a temperature sensor we provide.
BLE Connection
Bluetooth/BLE connections can be temperamental and confusing at times. Our app handles all connections itself. No need to go pair/unpair or fiddle around with other Android settings.
What’s Included?
1 ModuleSettings ECM
1 Open ended wiring harness
1 Temperature sensor (optional)
Highlights
- 2 ARM Cortex based high speed microcontrollers
- MicroUSB ports for firmware updates
- Integrated Bluetooth Low Energy module
- 2 integrated fan controllers
- 1 LIN bus connection (Mercedes atomizer not included)
- 2 CAN bus connections
- Custom fan ventilated case
- OLED display showing system status (optional)
- 1 external temperature sensor and wiring (optional)
- High quality custom ENIG boards
- High quality Hirose connectors
- Integrated voltage converters
- 1 customizable voltage output (2-32V, 2A max)
- 7 device connections (4A total max)
- 2 – 5V external fan connections
